Frequently Asked Questions:
Q: What is a broadband not-spot?
A: Broadband not-spots are areas within
enabled exchanges that still cannot access first generation
broadband. Our definition of first generation broadband is 512kbps
downstream and 256kbps upstream.
If you are experiencing speeds slower than this, we would
class you as a not-spot. There are several reasons why some areas
are classified as not-spots,
These include:
- The length of the copper line from the telephone exchange to
the site is too long;
- There is a line sharing device (also known as DACS - Digital
Access Carrier System) on the line - Broadband needs to be directly
connected to a site, so it will not work over these line sharing
devices;
- Existence of aluminium cabling in the line.
- Poor quality copper cabling. The copper cabling may be badly
corroded or the quality of the copper may be lower, so broadband
would have difficulty in going over the cable.
- Poor connections in the line. The connections between cables or
repairs are also a place where some of the broadband signal can be
lost.
Q: How can i check my current broadband speed
to see if I'm in a not-spot?
A: There are a number of broadband speed
checkers on the internet. Open a search engine (google, msn,
Jeeves) and type in "ADSL speed checker".
Use whichever one you prefer to check your line speed. If you
are experiencing lower upstream or downstream speeds, than those
reported then please contact us at: enquiries@bbwo.org.uk
Q: What is the Welsh Assembly doing to sort
this problem out?
A: The Regional Innovative Broadband Support
(RIBS) project is working with its chosen contractor - BT
Group - to analyse all the telephone lines and sites in Wales.
We have built up a good understanding of the number
of not-spot areas and will be tackling the
addressable not-spots over the course of the contract. The
current contract will run for 3 years, with an option to extend for
a further 2 years.
We have worked with BT and together we have produced a map
showing all the current registrations on the brokerage website.
It is possible that there may be a large number of not-spots,
which may mean that some areas will not receive broadband for some
considerable time. However, there are other ways of getting a
broadband service either via a wireless or satellite network.
Finally, there may be some very remote areas that are too
expensive to provide a broadband service. The amont of time and
money that is available to the Welsh Assembly is limited and there
may be some areas that will not benefit from this project.
"Still can't get Broadband?"
If you already know you are in a not-spot area, you can
assist us by registering your details on our website: www.bbwo.org.uk/blackspots
In addition, you may want to ask your neighbours to see if they
are facing the same not-spot issues, and get them to register
their details onto the brokerage site - the more registrations that
are collected in one area, the better the business case and
justification for doing the work.
We have access to lots of leaflets, posters, CDs etc which are
freely available for people to spread the word and increase
awareness and demand in their area. Please e-mail broadband@wales.gsi.gov.uk
if you would like us to send you some material.
The new DSL Max technology is capable of increasing the length
that broadband can travel by up to 1km further in some instances.
If you have been told by an engineer that the length of your line
makes broadband just out of reach, it may be worth trying to
re-order broadband. Specifically ask for the DSL Max broadband as
this may now enable you to get broadband with the newer
technologies.
If you have success in getting broadband through whatever means,
it will be very useful for us if you could let us know so that we
can move on to other not-spots and continue to assist other
areas of Wales. Otherwise we may waste time in looking for
solutions to not-spots which have already been solved.